Articles on: Internet.
This article is also available in:

How do I configure static IP addresses for my devices on your routers?

⚠️ Important notice for advanced users - Please be aware that a router reset, a common step in some troubleshooting solutions, will erase any custom static IP settings.


This guide will explain how to assign static IP addresses only for your personal network (LAN) - oxio doesn’t support WAN static IPs.


⬇️ Continue scrolling below until you see which model of oxio-provided router you have (steps will differ for each).


Setting a static IP on the oxio WiFi pod.



  1. Open the oxio Wi-Fi app on your smartphone device.
  2. Tap Settings > Network.
  3. Scroll down and tap on the* *IP reservations button.
  4. Tap Add new and choose a device from the available list. If the device hasn’t been connected to the network yet, you can reserve an IP using its MAC address with the Add manually option at the bottom of the page.
  5. Tap Add to reserve the current IP address. Tapping on the device again lets you change it to another available address within the current IP range. You can also use the Add a Port option to set up port forwarding for that device.


Setting a static IP on the eero 6.



  1. Open the eero app on your smartphone device.
  2. Tap Settings > Network Settings > ISP Settings > WAN Type.
  3. Select Static IP.
  4. Enter the static IP address you want to assign the device and Save.


Setting a static IP on the SmartRG router.



For SR400ac and SR905acv routers…


  1. On a browser, go to http://192.168.1.1/
  2. Log in using one of the following credentials:


Username: oxio

Password: FL54cBHZs6


OR (for earlier software versions)


Username: user

Password: oxio


  1. Click Network on the left-hand sidebar.
  2. Click LAN or LAN Network > DHCP Server.
  3. Scroll down to *DHCP Static Associations *and click Add host. All devices connected to your network will appear in the dropdown menu.
  4. Select your device from the Connected hosts dropdown menu. All information regarding your device will autopopulate.
  5. Scroll down to the IP Address field. Enter the static IP address you want to assign the device, and then click Save.


Repeat steps for each static IP you wish to assign.


For SR516ac and SR616ac routers…


  1. On a browser, go to http://192.168.1.1/
  2. Log in using one of the following credentials:


Username: oxio

Password: FL54cBHZs6


OR (for earlier software versions)


Username: user

Password: oxio


  1. Click Advanced Setup on the left-hand sidebar.
  2. Click LAN > Scroll down to Static IP Lease List *> Add Entries. *If you have the SR616ac router or if nothing happens when you click on LAN, click on IPv4 Autoconfig which will appear below instead.
  3. Input the MAC address of the device you wish to assign a static IP address to. The format should be as follows:


xx:xx:xx:xx:xx:xx (you must include the colons in between each two numbers).


Tech Support agents cannot help you find the MAC address of your devices.


  1. After the MAC addres of the device has been added, input the static IP address you wish to assign.
  2. Click on Apply/Save.


Repeat steps for each static IP you wish to assign.

Updated on: 24/09/2025